- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
TD75 Type Belt Conveyor Troughing Roller
The influence of radial runout of Belt Conveyor troughing roller on belt conveyor: within the range of runout stipulated by the state, the belt conveyor can keep running smoothly, otherwise it will make the belt conveyor runout resonance, causing material spraying, polluting the environment, the higher the belt speed, the smaller the radial runout. The national standard stipulated in our country is 0.7 millimeters, and the volume stipulated in the Japanese JIS standard is 0.5 millimeters. The Belt Conveyor troughing roller group of Shunda company: When the belt deviates to any side, the small end of the taper and the taper roller produces sliding friction, which makes the upper beam of the idler group rotate and brings the belt to the right.Chat Now
TD75 Type Belt Conveyor troughing roller
The influence of radial runout of Belt Conveyor troughing roller on belt conveyor: within the range of runout stipulated by the state, the belt conveyor can keep running smoothly, otherwise it will make the belt conveyor runout resonance, causing material spraying, polluting the environment, the higher the belt speed, the smaller the radial runout. The national standard stipulated in our country is 0.7 millimeters, and the volume stipulated in the Japanese JIS standard is 0.5 millimeters. The Belt Conveyor troughing roller group of Shunda company: When the belt deviates to any side, the small end of the taper and the taper roller produces sliding friction, which makes the upper beam of the idler group rotate and brings the belt to the right.
The trough type idler reduces the abrasion and running resistance of the belt.
The trough roller has the advantages of light weight, small rotating resistance, friction centering roller, flexible operation, low noise, mobile conveyor, ultra-low friction coefficient, buffer roller, super anti-adhesion ability, can reduce belt wear, no damage to belt and joint in use process, trough roller, and metal roller ratio can be extended. The service life of the long belt is 1-2 times. Reducing the running resistance and power consumption of the conveyor, realizing the energy-saving and consumption-saving 1.1 idler shaft
The Belt Conveyor troughing roller has high wear resistance, can withstand repeated impact and vibration, can resist high and low temperature, is not easy to deform under abnormal ambient temperature, can be used for various materials transportation and environmental harsh occasions, polymer roller. The roller shaft is forged from No. 45 steel. Unlike the ordinary roller shaft, a deep hole with a diameter of 6-8 mm is drilled from one end of the shaft during the shaft processing. The hole depth is from one end of the shaft to the other end of the bearing chamber, and a small hole is drilled on the shaft surface at both ends of the bearing chamber. One end of the shaft is equipped with an oil cup and is injected with oil. In the working process, the tapered up-center roller, oil flow to the bearing in the deep hole, can play a role in cooling bearings, to prevent bearing damage caused by overheating.
Parts of Belt Conveyor troughing roller introduction:
Quality and technical requirements:
1. The Belt Conveyor troughing roller pipe, idler shaft (cold-drawn round steel), stamping bearing seat and matching seals should be inspected. The tolerance of tube diameter ellipticity is less than 0.6 mm, the tolerance of cold-drawn rib diameter is + 0.002 - + 0.012mm. The bearing seat and matching seal must be assembled first, and the shaft clamp spring must be steel, and it will not be deformed after installation. Other matching parts should be inspected before they can be used. Because of the large batch of matching parts, the inspection is random inspection. When problems are found in production and assembly, the workshop should promptly notify the quality inspection personnel, and the quality inspection department is responsible for organizing analysis and processing.
2. blanking: when the grooved idler tube and shaft are cut off, the cutting surface of the pipe and shaft should be perpendicular to the axis. The length tolerance of pipes and shafts is less than 2mm, and the tolerance of perpendicularity is less than 2mm.
3. Tube processing: In the double-head lathe processing pipe end bearing pedestal steps, processing diameter and depth tolerances must meet the requirements of the drawings, to ensure that the concentricity of the two bearing pedestals and the assembly requirements of both ends of the spring.
Details of our belt conveyor idler roller range:
|Standard Diameter||Length ( mm)||Bearings Type||Idler's pipe thickness|
|89||3 1/3||150~3500||204 205||3.0mm~4.0mm|
|102||4||150~3500||204 205 305||3.5mm~4.0mm|
|108||4 1/4||150~3500||204 205 305 306||3.5mm~4.0mm|
|114||4 1/2||150~3500||205 206 305 306||3.5mm~4.5mm|
|127||5||150~3500||204 205 305 306||3.5mm~4.5mm|
|133||5 1/4||150~3500||205 206 207 305 306||3.5mm~4.5mm|
|140||5 1/2||150~3500||205 206 207 305 306||3.5mm~4.5mm|
|152||6||150~3500||205 206 207 305 306 307 308||4.0mm~4.5mm|
|159||6 1/4||150~3500||205 206 207 305 306 307 308||4.0mm~4.5mm|
|165||6 1/2||150~3500||207 305 306 307 308||4.5mm~6.0mm|
|177.8||7||150~3500||207 306 307 308 309||4.5mm~6.0mm|
|190.7||7 1/2||150~3500||207 306 307 308 309||4.5mm~6.0mm|
|194||7 5/8||150~3500||207 307 308 309 310||4.5mm~6.0mm|
|219||8 5/8||150~3500||308 309 310||4.5mm~6.0mm|
Working place of Belt Conveyor troughing roller:
About shunda company introduction:
Baoding Shunda Rubber Belts Co., Ltd has focused on top quality conveyor belts, idler roller, pulley and frame products for over 23 years in China. We started as a small operation, but now have become one of the leading suppliers in the conveyor industry in China. Meanwhile, the provincial government has also awarded us a "Hebei Famous Products" commendation for series marketed under our 'SHUNDA' brand.
Today, Baoding Shunda Rubber Belts Co., Ltd registered capital is USD17 million. It has been one of the top producers of quality conveyor component products, such as: steel cord conveyor belt, EP, Nylon conveyor belt, PVC PVG whole core fire resistant conveyor belt, sidewall conveyor belt, tear and fire resistant steel cord conveyor belt, conveyor idler, roller, pulley, frames more than 100 types and sizes.
Quality control :
Foreign customer cooperation:
Previous: Flat Conveyor Belt For Industrial