- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
12mm Thickness Fire Retardant Conveyor Belt
12mm thickness fire retardant conveyor belt, also known as the whole core flame retardant conveyor belt, is made by the whole core impregnated with PVC impregnated paste and plasticized or vulcanized. It has the characteristics of large strength, large traffic volume, and balanced transportation. At the same time, the product has good flame retardant, antistatic, impact resistance, wear resistance, corrosion resistance and other properties.Chat Now
12mm thickness fire retardant conveyor belt
12mm thickness fire retardant conveyor belt, also known as the whole core flame retardant conveyor belt, is made by the whole core impregnated with PVC impregnated paste and plasticized or vulcanized. It has the characteristics of large strength, large traffic volume, and balanced transportation. At the same time, the product has good flame retardant, antistatic, impact resistance, wear resistance, corrosion resistance and other properties.
Production process of fire retardant conveyor belt:
Fire-retardant conveyor belt production process: drying → molding → smelting → mixing → parking → refining → compression → forming → curing → packaging. Different from the non-nylon skeleton conveyor belt, the production process of the nylon layered non-flammable conveyor belt is subjected to secondary tensile shaping after vulcanization. There are two main methods for secondary tensile shaping. One is the cooling shaping method under the internal pressure(hereinafter referred to as intramode shaping) and the other is the external tensile cooling shaping method(hereinafter referred to as extramode shaping). The modeling method is simple and the shaping effect is good. However, this method has high energy consumption and low production efficiency. In contrast, the external modeling method requires more than one tensile device, but after adopting this method, the product quality is reliable, the production efficiency is high, and it is suitable for large-scale production.
Fire retardant conveyor belt specification:
|Type and technical parameter of PVC conveyer belt:|
|Standard MT914-2008||Safety factor 10|
|The Slope <16℃|
|Standard type||Degree||Breaking strength≥,N/mm||Tensile yield≥%||Advising Mindiameter |
of conveyor pulley
|Type and technical parameter of PVG conveyer belt:|
|Standard MT914-2008 BS3289 HG2805||Safety factor 10|
|Standard type||Degree||The slope <20℃||Recommend minimum |
|Breaking strength≥,N/mm||Tensile yield≥,%|
Maintenance and description of fire retardant conveyor belt:
During transportation and storage, the conveyor belt shall be kept clean to avoid direct sunlight or rain and snow, to prevent contact with acids, bases, oils, organic solvents and other substances, and to be one meter away from the heating device.
The temperature in the warehouse should be kept between -18C ° -40C °, and the relative humidity should be between 50-80 %.
During the storage period, the product must be placed in a roll and must not be folded. During the storage period, it should be turned every quarter.
Different types, specifications of the number of conveyor belts should not be used together, the joint is best to use the adhesive method.
The type, structure, specification and number of layers of conveyor tape should be reasonably selected according to the conditions of use.
The speed of transmission tape should generally not be greater than 2.5 m/s, large blocks, large wear and use of fixed type unloading devices should be as low as possible.
The relationship between the diameter of the transmission drum and the conveyor belt layer, the transmission drum, the matching of the change to the drum, and the requirements of the roller groove angle should be reasonably selected according to the design regulations of the transport aircraft.
In order to reduce the impact of material falling on the tape, a slot should be used to reduce the distance of material falling. The tape receiving section should shorten the distance between the rollers and adopt a buffer roller to prevent
Leakage material, the side of the belt should be used soft and moderate baffle to avoid the baffle plate is too hard, scratch the belt surface of the conveyor belt.
The following items should be noted during the use of the conveyor belt:
(1) Avoid the roller being covered by materials, resulting in a rotation failure, preventing leakage of material from being stuck between the drum and the tape, paying attention to the lubrication of the active part, but not to oil the conveyor belt;
(2) avoid starting with load;
(3) If the tape is deviated, measures should be taken to correct it in a timely manner;
(4) Local damage to the adhesive tape should be repaired in time to avoid expansion;
(5) Avoid tape being blocked by the frame, pillar or block material to prevent cracking.
Causes of damage to the rubber surface covered by the conveyor belt:
1. The gap between the guide tank lining and the tape is not suitable, causing abnormal wear or embedding of foreign matter in the gap, causing abnormal wear or scratch.
2. The material flow rate at the guide tank is inconsistent with the speed of the conveyor belt, and the drop is large, accelerating the wear of the rubber surface.
3. The roller is damaged, causing abnormal wear or scratch of the belt.
4. Illegal operations, welding slag burns during maintenance, and scrubbing of sweeper.
5. Duct tape skid, can also cause abnormal wear of rubber belt.
Shunda company workshop:
Quality control :
Packing and loading:
We all take standard export packing cases made of exemption plates that thickness of the composite plates are about the 9mm to 15mm according with the export requirements.Of course,We also can take the wooden cases made of solid wood with fumigation and supply the Inspection Certificate of Fumigation.
(1)Shipping:We cooperate with good international ship agency to ensure the interests of the buyer that the buyer can receive the goods in time.We usually accept liner shipping so that we should contact duly and co-operate on the freight peak to solve those problems of transportation.If you have any other requirements,Please tell us and consult with it.
(2)Express and Air transport:We also move goods by express and air transport if you really have emergency demand for these goods .But we can't take the resulting costs and the scale of the goods must be small.
(3)International multimodal transport:The qualified MTO takes the transportation of the goods to make sure to arrive in terminal on time.We use container transport in general with the exception of special circumstances
Delievery time : 7-10days.
Payment term : 30% in advance, 70% before shippent.
Contact information :
Baoding Shunda Rubber Belts Co., Ltd
Boye Rubber Industrial District Of Hebei Province , China.
Email : email@example.com
Web : www.shundaxj.com www.sd-conveyorbelt.com