- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
Cotton Conveyor Belts For Electric Power
Cotton conveyor belts for electric powerChat Now
Conveyor belts should pay attention to those points?
1. The running speed of conveyor belt is generally not to be more than 2.5m/s. The material with large block size, large abrasion, and unloading device using fixed pear should be adopted as low speed as possible.
2. The relationship between the diameter of the roller of the roller conveyor and the layer of the conveyor belt, the matching of the driving roller and the reversing roller, and the requirements for the slot angle of the roller shall be selected according to the design requirements of the conveyor.
3. Feeding direction should be along the running direction of the conveyor belt. To reduce the impact of the material falling on the conveyor belt, the chute should be adopted to reduce the material drop distance; the conveyor belt receiving section should shorten the idler spacing and adopt the buffer roller For leakage, the conveyor belt is compliant with a soft and moderate baffle plate to prevent the stock plate from becoming too hard and scratching the belt surface of the conveyor belt.
4. When the conveyor is in use, the idler is missing and should be added and repaired in time. The idler is covered by the material, causing the rotation to be ineffective, preventing the leakage of the material stuck between the roller and the tape, and paying attention to the lubrication of the active part of the conveyor belt. No oil conveyor belt.
5, to avoid the conveyor belt suffered rack, pillar or block material block, to prevent breakage tear, found that the conveyor belt is partially damaged, the application of artificial cotton timely repair, so as not to expand.
If you want to know more about products or need offer, welcome to contact with us : firstname.lastname@example.org