- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
Mining EP Type Industrial Conveyor Belt
Mining EP type industrial conveyor belt, also known as polyester conveyor belt, wear-resistant conveyor belt, automatic conveyor belt, cement conveyor belt, high body modulus, use of small elongation, good heat resistance stability, impact resistance, suitable for medium and long distances, Higher discretion, high-speed conditions to transport materials.Chat Now
Mining EP type industrial conveyor belt
Product introduction :
Mining EP type industrial conveyor belt, also known as polyester conveyor belt, wear-resistant conveyor belt, automatic conveyor belt, cement conveyor belt, high body modulus, use of small elongation, good heat resistance stability, impact resistance, suitable for medium and long distances, Higher discretion, high-speed conditions to transport materials.
Mining EP type industrial conveyor belt features:
1. High strength, thin body, light weight
2. Use EP impregnated canvas as skeleton material
3. Soft body, good groove, good elasticity
4. Impact resistance, wear resistance, corrosion resistance
5. Adapt to large load, faster speed and medium and long distance material transportation
6. Run smoothly and do not run sideways
Full thickness tensile properties of product:
A. The longitudinal tensile strength of the band is not less than the following nominal values: 160, 200, 250, 315, 400, 500, 600, 630, 800N/mm
B. The full thickness longitudinal drawing length of the belt is not less than 10 %. The full thickness longitudinal reference force elongation shall not exceed 4 %.
C. Straightness: not more than 25mm.
Maintenance and description：
During transportation and storage, the EP type industrial conveyor belt shall be kept clean to avoid direct sunlight or rain and snow, to prevent contact with acids, bases, oils, organic solvents and other substances, and to be one meter away from the heating device.
the temperature in the warehouse should be kept between -18C ° -40C °, and the relative humidity should be between 50-80 %.
During the storage period, the product must be placed in a roll and must not be folded. During the storage period, it should be turned every quarter.
different types, specifications of the number of conveyor belts should not be used together, the joint is best to use the adhesive method.
The type, structure, specification and number of layers of conveyor tape should be reasonably selected according to the conditions of use.
The speed of transmission tape should generally not be greater than 2.5 m/s, large blocks, large wear and use of fixed type unloading devices should be as low as possible.
The relationship between the diameter of the transmission drum and the conveyor belt layer, the transmission drum, the matching of the change to the drum, and the requirements of the roller groove angle should be reasonably selected according to the design regulations of the transport aircraft.
In order to reduce the impact of material falling on the tape, a slot should be used to reduce the distance of material falling. The tape receiving section should shorten the distance between the rollers and adopt the buffer roller. In order to prevent leakage, the side of the tape should use a soft and moderate baffle to avoid the baffle plate being too hard and scraping the belt surface of the conveyor belt.
Shunda company introduction:
Baoding Shunda Rubber Belts Co., Ltd has focused on top quality conveyor belts, idler roller, pulley and frame products for over 23 years in China. We started as a small operation, but now have become one of the leading suppliers in the conveyor industry in China. Meanwhile, the provincial government has also awarded us a "Hebei Famous Products" commendation for series marketed under our 'SHUNDA' brand.
Today, Baoding Shunda Rubber Belts Co., Ltd registered capital is USD17 million. It has been one of the top producers of quality conveyor component products, such as: steel cord conveyor belt, EP, Nylon conveyor belt, PVC PVG whole core fire resistant conveyor belt, sidewall conveyor belt, tear and fire resistant steel cord conveyor belt, conveyor idler, roller, pulley, frames more than 100 types and sizes.
Shunda company overseas market:
We are capable of mixing and producing an infinite number of conveyor component products, and offer some of the most advanced manufacturing capabilities available, including custom molding and machining.
1.For Conveyor belt: We have 6 production line and more than 4 workshop to support conveyor belt production. Our quality control department has a lot of machines to test all of belts performance, such as Rubber mooney viscosimeter, Rubber rotor-free vulcanizer, aging test chamber, abrasion testing machine, rubber fatigue testing machine etc.
2.For Conveyor idler pulley frame: We have 3 production line and more than 4 workshop to support conveyor idler pulley production. Our capacity is 2000 Unit per day.
About delivery and payment term :
Production time :7-10days.
Payment term : 30% in advance, 70% should be paid before shipment.