- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
ST/S Steel Cord Conveyor Belt
ST/S steel cord conveyor belt is a popular products in conveyor belts field.T The steel cord conveyor belt advantage is much more strength of belting and save purchase cost. At the same heavy duty usage, if we use steel cord conveyor belt, the price will cheap than fabric conveyor belts.Chat Now
ST/S Steel cord conveyor belt
ST/S steel cord conveyor belt is a popular products in conveyor belts field.The cover compounds including General, Fire-resistant, Cold-resistant, Abrasion-resistant, Heat-resistant and Chemical-resistant. tear-resistance steel cord, Standard ,High-grade, Ordinary nonflammable, Wear-resistant, Heat and wear-resistant types. The steel cord conveyor belt advantage is much more strength of belting and save purchase cost. At the same heavy duty usage, if we use steel cord conveyor belt, the price will cheap than fabric conveyor belts.
GB/T9770, DIN22131, EN ISO 15236, SANS1366 and AS1333.
Cover property and grade:
Tensile strdngth: >=15Mpa, 18Mpa, 20Mpa, 25Mpa
Elongation at break: >=350%, 400%, 450%, 450%
Change rate of tensile strength: -25~+25%
Change rate of elongation at break: -25~+25%
Abrasion: <=200mm3, 150mm3, 120mm3, 90mm3
|Normal Size of steel cord conveyor belt|
|(Tope rubber+steel cord+under rubber)|
1. High tensile strength
Steel cord conveyor belt is suitable for large span,long distance transportation of materials
2. Small elongation in use
It need only a very short take-up stroke distance.
3. Small diameter of drive pulley
Steel cord conveyor belt body has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue.Therefore,drive pulley of smaller diameter can be used to make the equipment smaller.
4. High adhesion between rubber and steel cord
The steel cords are coated with zinc on their surface,and also the rubber used has the property of qood adhesion with steel cords.Therefore,the rubber is tighrly adhered to the steel cords and is resistant to shock and difficult to
drop,so the rubber belts are long in life.
5. Even tension of steel cords
Out of our advanced techniques in manufacturing,the steel cords are very evenly arranged and have the same tension,so the belts are well balanced in running and difficult to run awry.
6. Good troughability
As the belt body has no transverse skeleton,it is easyv to from a deep trogh,so the belts can load more materials and prevent the materials from escaping.
Steel cord conveyor belt boby has no transverse skeleton,it is easy to from a deep trough,so the belts can load more materials and prevent the materials from escaping.
8. Inspection of the belt with X-rays
Users can X-rays to inspect damages of the skeleton steel cords on the conveyor machines to prevent accidents from happening.
How to repair damaged steel cord conveyor belt?
1. Rubber patching:
The biggest advantage of the German technology's rubber patching method is the fast repair speed. After the grinding and cleaning of the place to be applied, apply the adhesive and paste the rubber to start the operation.
2.Partial rubber vulcanization
The local damage is vulcanized with a small vulcanizer. Due to the size of the vulcanizer, the repair speed is only about 0.5m/h. This method is not suitable for long distance repair.