- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
Taper steel conveyor idlers
If the decibel of a cone roller exceeds the bottom line by 8 decibels, we think that the bearing requirement is smooth. When we realize that the bearing demand is smooth, knowing when to stop the oil injection will avoid excessive smoothness. Can be completed in accordance with the following three steps:
1) When a smooth oil is written, a smooth technician uses an ultrasonic instrument to detect the bearing. Grease gradually until the decibel strength drops to the bottom line.
2) If there is no foundation line as a guide, the amount of smooth oil should be stopped when the sound drops and then rise again. At this time, the technician should stop using the smooth oil.
3) Calculate the amount based on the guidance of the tapered roller and the conflict roller manufacturer, then write the smooth oil, not too much. This process is very one-sided, has nothing to do with ultrasound, and this process has never failed.
The two major questions about tapered roller protection skills are: 1. When to change oil. 2. How much oil should be changed? If the oil change is too little, the bearing will be abandoned sooner; if the oil change is too much, the p