- Conveyor Belt
- Conveyor Idler
- Conveyor Pulley
- Conveyor Bracket Frame
Lagging Belt Conveyor Drive Pulley For Heavy Duty
The lagging Belt conveyor drive pulley heat vulcanization rubber is the traditional conveyor pulley rubber coating process in China. It mainly uses the high temperature vulcanization process to vulcanize the unvulcanized wear-resistant rubber sheet covering the surface of the conveying pulley to the surface of the pulley to protect the Belt conveyor drive pulley.Chat Now
Lagging Belt conveyor drive pulley for heavy duty
The lagging Belt conveyor drive pulley heat vulcanization rubber is the traditional conveyor pulley rubber coating process in China. It mainly uses the high temperature vulcanization process to vulcanize the unvulcanized wear-resistant rubber sheet covering the surface of the conveying pulley to the surface of the pulley to protect the Belt conveyor drive pulley. Prevent the conveyor pulley from slipping and the belt is deflected! Compared with the drum cold vulcanized rubber and the plug-in type shell rubber, the hot vulcanized rubber is suitable for special rollers/rubbers/rollers/small rolls with a diameter of less than 300 or coated with urethane rubber, silicone rubber, fluoro rubber, etc. On the outer rubber, the cost of rubber encapsulation is low, it is not easy to degumming, and the service life is long.
|Driving Pulley (rubber surface)|
|Belt Width||Standard Diameter of Pulley|
|650 mm||500mm,630 mm|
|800 mm||500mm,630mm,800mm,1000mm,1250mm,1400 mm|
|1000 mm||630mm,800mm,1000mm,1250mm,1400 mm|
|1200 mm||630mm,800mm,1000mm,1250mm,1400 mm|
|1400 mm||630mm,800mm,1000mm,1250mm,1400 mm|
|1600 mm||630mm,800mm,1000mm,1250mm,1400 mm|
|1800 mm||630mm,800mm,1000mm,1250mm,1400 mm|
|2000 mm||800mm,1000mm,1250mm,1400 mm|
|2200 mm||1000mm,1250mm,1400 mm|
|2400 mm||1000mm,1250mm,1400 mm|
The drawing of belt conveyor drive pulley for heavy duty:
As the important conveying equipment component on the belt conveyor, the rubberized roller will bring unpredictable impact and loss to the normal assembly line production operation. Therefore, it is necessary to say that the most common problem of the rubberized roller is that What, and the problems that we have changed, which method, which technology to deal with, and how the various maintenance methods will affect the rubberized roller, through these analysis, everyone who encounters unexpected situations will Make choices based on your own situation, and we can also choose the best solution.
1, The most common problem with rubberized pulley
The most commonly used materials for rubberized belt conveyor drum pulley are: carbon steel galvanizing, carbon steel chrome plating, carbon steel rubber, aluminum alloy, stainless steel, ABS, etc. Since the conveyor is subjected to various shocks and other various composite forces during the production process, the bearing position of the rubberized roller often wears out. Once we have such a situation, how can we start to solve it?
2. Solution to common problems of rubberized pulley
Generally, the above situation occurs. Some people carry out maintenance methods in a more conventional way, that is, applying surfacing, thermal spraying, and brushing, but these three methods have great drawbacks, such as surfacing, welding. The high temperature is generated, and the thermal stress generated by the high temperature may cause the transportation equipment to be easily damaged, bending deformation and fracture in the future work, and the brush plating is limited by the thickness of the coating, and is relatively easy to peel off in the later stage; The two methods can solve the problems of the rubberized roller, but will leave the sequelae to the conveyor line accordingly.