Home > Knowledge > Content
How to reasonably improve the working efficiency of heat-resistant conveyor belts
Oct 15, 2018
2014071313322623707.jpgIf the heat-resistant conveyor belt has run astray, measures should be taken to correct it in time. Different types and specifications of the number of heat-resistant conveyor belts should not be used together, the joint is best to adopt the adhesive method. The type, structure, specification and number of layers of heat-resistant conveyor belts shall be reasonably selected according to the conditions of use. The running speed of the heat-resistant conveyor belt should generally not be greater than 2.5 m/s. The low speed should be used as far as possible for materials with large blocks and large abrasion and for unloading devices using fixed pears. When the conveyor is in use, if the roller is missing, it should be added and repaired in time; The roller is covered with materials, causing a rotary failure, preventing leakage of material from being stuck between the drum and the tape, paying attention to the lubrication of the active part of the heat-resistant conveyor belt, but not the heat-resistant conveyor belt. To avoid being blocked by frame, pillar or block material, to prevent breaking and cracking, and to find partial damage to the heat-resistant conveyor belt, use artificial cotton to repair it in time to avoid expansion.

The relationship between the diameter of the transmission drum and the layer of the heat-resistant transmission belt, the matching of the transmission drum, the redirection drum, and the requirements for the roller groove angle should be reasonably selected according to the design regulations of the transport aircraft. In order to reduce the impact of material falling on the heat-resistant conveyor belt, the flow direction of the heat-resistant conveyor belt of the feed material Fangxiangyingshun should be slotted to reduce the material drop distance; Heat resistance conveyor belt receiving material section, should shorten the distance of the roller and adopt the buffer roller as the leakage material, the heat resistance conveyor belt adapt to adopt the soft and moderate baffle plate, so as not to block the material plate too hard, scratch the belt surface of the heat resistance conveyor belt. Prevent heat transfer belt load from starting.

2018-10-15