Home > News > Content
​Field Processing Method For Conveying Belt Deviation
Jul 18, 2016

Field processing method for conveying belt deviation

(1) automatic roller adjustment: when conveying belt deviation range when conveying belt deviation and installation of self-aligning idler.

(2) the appropriate tension adjustment: when conveying belt deviation and left and right, direction from time to time that the conveyor belt too loose, adjust tension device to eliminate the deviation.

(3) single side-roll offset: the conveyor belt always slanting to one side, and can be installed within range number of vertical roll, to reset the tape.

(4) to adjust the roller adjustment: conveyor belt deviation at the drum, check that the drum is an exception or a rocky ledge, adjust rotate to horizontal position correctly the cylinder to eliminate the deviation,

(5) correcting conveyer belt joint adjustment; conveying belt deviation is always in one direction, and the maximum deviation in the joints, correction of conveyor belt joints perpendicular to the conveyor belt line eliminating deviation

(6) the elevated conveyor adjustment: conveying belt deviation distance and direction will, in direction of deviation to the side cushion idler sets to eliminate the deviation.

(7) adjust the idler adjusting: conveying belt deviation direction must, check idler centerline perpendicular to the conveyor belt line does not, you can adjust the idler to eliminate the deviation.

(8) remove appendage adjustable conveying belt deviation does not change, found idler, roller sticking appendages will be cleared after eliminating deviation.

(9) the correction for deviation: tape light not turning, overloaded deviation, can be adjusted to eliminate weight and position deviation.

(10) the correct bracket offset: conveying belt deviation and position fixing, running a serious degree of horizontal and vertical adjustable bracket to eliminate the deviation.