Home > News > Content
Causes And Prevention Measures For Belt Edge Wear
Jul 18, 2016

Conveyor belt edge wear mostly conveying belt deviation band edges and friction and wear of the rack. Conveyor belt should run on the centerline of the roller, but due to the conveyor of defects caused by manufacturing, installation, use, conveyors often deviate from the centerline deviation. Usually, conveying with in width direction Shang allows has 5% of run partial volume, dang run partial too much Shi, conveying with and supporting roll bracket, and machine frame contact and caused side rubber wear, serious run partial Shi, even will makes conveying with turned side, as drum of radial tour screws head, cleaning device block block, raised parts, or machine frame clearance had small, easy caused conveying with tear, cover rubber local stripping and designated injury.
Here are precautions:

Through the analysis of wear on the conveyor belt, belt conveyor design, appropriate preventive measures can be taken to extend belt life. Typically from the following 5 aspects to optimize the design to reduce the wear on the conveyor belt.
1. the reasonable choice of conveyor belt
2. reduce wear of conveyor belt of the conveyor components.
3. feeding device structure optimization.
4. reduce the impact of processes on the conveyor belt.
5. electrical protection devices.
Conveyor application will continue, will be more and more widely used, but the conveyor construction investment, high transportation costs, property maintenance, and lets us in on how to extend the conveyors and service life of conveyer belt on the subject of further studies, fuller use of the conveyor.